Hey Charles Davis!

[Michael Reynolds]

Hey Charles, how come your book is not listed in the "Books" section of this page? Also, is it possible to get an evaluation copy?

Thanks!

Mike R.

[Trevor Bailey]

Try contacting CNC or the educational division(Mike F.).

[Charles Davis]

If you are a school, you should be able to get an eval copy. I think all dealers were shipped one copy.

www.mastercamedu.com lists the book, as well as some samples from it.

Volume 2 (3D Modeling and Machining) should be back from the printer any day now.

You can order the books via your dealer, or CNC Educational Division PH: 800-275-6226

[Mike Freimann]

We don’t have any evaluation copies of the handbook. This is based on the limited numbers we are printing due to the anticipated release of Version 9. Not that I am saying when 9 will be available. You can see all of chapter 2 on our site. It is in a downloadable PDF. I think chapter 2 is fairly representative of the Handbook. Volume 2 was at the printers and may already be available. Check with your dealer.

Tomorrow is my last day in the office for the rest of the year so.

Have a Merry Christmas and Happy New Year.

Mike Freimann

[Trevor Bailey]

You have a good one also Mike. Has it snowed there yet? Have you taken your 4X out to play?

[Mike Freimann]

We got a little snow but mostly it has rained most of the month. The lake near my house has even overtaken the road a few times. I haven’t gone wheeling in cruiser in some time. Unless you count driving through two to three feet of water off road. I need to update the site with some new pictures. I can’t believe how many people ask about my fj40. I even got an offer at a show in New Orleans.

Mike

[Trevor Bailey]

I have a Tacoma that I play in mostly. I have recently bought a 2500 Suburban and put a Tuff 6" lift on it. Got some more engine work to do on it, but it is still a sweet machine now. Can't wait for our first snow. Maybe Charles & Julie Davis will let me play at their property in Mesa Grande!?!?!?!?! We'll see.