Level Manager and Solids

[Mjölnir]

I haven't yet been able to nail down the sequence of operations causing it, but when working on solids, level names have been changing themselves to "Outer Inner". This is occuring on the current active level and has happend to me on different jobs, seemingly randomly.

 

Anybody else seen this?

[Mjölnir]

Oops....

 

MCX-MR1

[Tim Simmermon]

Are you importing the solid or creating it yourself? If you are importing it, it could be possible that it is bringing in the level names from the original.

[Zero]

Funny, I just had the same thing happen to me, but Im not doing any solids work on this file, just surfaces imported from an igs......

[Mjölnir]

I'm currently working on solids imported from a .dwg file, and there were not any levels named "Outer Inner". I've also had it happen on imported parasolid files from Solidworks which doesn't support levels.

 

Had more levels strangeness this afternoon too.

 

I've been creating some lettering (geometry, not drafting) then X-form -> Drag -> Moving it, and it ends up on a level other than the current one. I started a new .mcx file (after a system reboot)and it didn't do it in it, but upon re-opening my current job I got the same thing. It's not the same level either, it gets sequentialy higher each time.

[Matt Berube at Ferron Mold]

That's the one you should send to [email protected]