X+ tool list

[Ashan]

Wheather we can use it in MR2

Anybody use this now

[Guest]

Linky

[Ashan]

please someone tell me where we can it to reinstall

I may have to reinstall it again

[Guest]

If you need to redownload it try this link

 

BAd Link try this one instead

 

Linky

[Ashan]

John its says the folder is invalid or corrupted

please send me in email may be better

[Guest]

The first link was bad, I fixed the link to the good one, try it again, if it doesn't work I'll email for you.

[Ashan]

Thanks I got it

[Ashan]

great it works now

[cadcam]

you can get it of my site under Downloads

 

My Downloads

[Bruce Kanzelmeyer]

Sorry guys, but when I run the xsetupsheet.dll in MR2 I get the following error: Incompatible C-Hooks internal version number. Recompile and relink the C-Hook: C:mcamxc-hooksx+xsetupsheet.dll

 

What am I doing wrong?--can't seem to get the x+ toolbar to showup! I even tried to re-download and reinstall the files...

[cncchuck]

i get same error as bruce so my ears are open

[Richard Bechard]

I had problems with this also.I had done a side by side install with mr1 and chose option during install to merge existing files.When I went to check file paths it had some of them pointing to my mr1 install so I changed them to the proper paths.

hth Rich

[Bruce Kanzelmeyer]

Still can't get X+ setupsheets to work/load--same error message as above. Could there be a problem with my update to MR2? I overwrote MR1, not side by side. Every morning I fire up MC, I have to go into configuration and reselect my custom settings--I have a custom profile defined, but I have to pick it again everytime I open up MC...didn't have to do that with MR1.