Year end thanks to the WEBBIES!!!!!!!!!

Michael Reynolds · December 29, 2001

I'd like to be the first (this NEW YEAR) to thank the webbies responsible for this forum for all their hard work and dillegence.

Thanks to you from both me and my students!!!

Respectfully,

Mike R.

[ 12-31-2001: Message edited by: Michael Reynolds ]

Will Slota · December 31, 2001

All agree that this is the greatest on-line resource for mastercam info but as for any cadcam I seriously doubt it.

Michael Reynolds · December 31, 2001

Yup, poor writing. I meant that I've checked out other cadcam forums, and this is by far the most effective and freindly.

Post edited.

Mike R.

cadcam · January 1, 2002

Thank you all at Emastercam for making this forum.

I hope this continues to grow like it did last year.

Every one asks were the best place is to learn Mastercam.

I think this a big factor along with reading and seat time.

Out here in Ca we have user groups every year.

This is where I would go to find the info that we get from this forum every day.

Now i dont have to wait for the user group to learn from other users like myself.

I enjoy talking with you all.

Maybe one year we can have a big get togeather.

Thanks again all.

Welcome to eMastercam