Print/Shaded

[tpreb6]

I searched the forum and really did not find a solution or simular problem. Your comments and help would be appretiated.

 

If we print a wire frame the file goes through rather quick, however, if we print a shaded copy it seems to take very long for the data to go to the printer. This was not a problem for us in 9.

HP Laser Jet 4v

 

Tom

[Mcam Nut]

Yeah I find the same thing, i noticed if i put the line width down to 1, and turn translucent shading on, it seems a bit faster, but of course it is slower then a wireframe

[Rick Henrickson 65]

Is that going through a network printer? the printer on my computer prints fast no matter what but the network printer is slower between wire and shading. Maybe it is printer settings?

[tpreb6]

Cas,

 

Yes, we are working thru a network. I don't know what could be different because it was fine in 9.

[Rick Henrickson 65]

does it print faster if you go to print preview then print from there?

[tpreb6]

Negative, still slug's along. ???