Wire lead in error

[CNCGUY]

Long story short - I had to let our wire guy go and now need to get programs done.

 

I put 2 files on the FTP Site in the WIRE folder.

 

 

T5659R00.MC9 Does not work. I get an error 'Lead-in not succesful - check thread position' The operations were imported from a file that works. It must be something I am doing, but cant figure it out.

 

T5655R00.MC9 Works fine

 

If someone could take a look, I would greatly appreciate it.

[edmBosto]

CNC,

Move the start point .05 to the left and regenerate.

[Kannon]

just shorten the line that your leading in .01 away from the start point of each thread position and regen.

Your lead in line is layin on the thread point..

it dont like that.

hth,

[Guest]

cnc guy,everyone is correct.don't have geometry

connected to your thread and cut points.slect thread point,chain geometry,select cut point.also uncheck

your max lead out.you had it set to zero.lead in and out must be more than the radius of your wire and the overburn.i usually have my thread and cut points about .050 away from my geometry.

[CNCGUY]

Thanks a bunch guys.

 

That will get the tool done - but I still have a lot more to learn!!!!

[edmBosto]

Del,

How often do you feed your fish. He seems very content.

[Guest]

edmbosto,

i'm thinking of putting him on a diet,so he doesn't outgrow his fishbowl.

[edmBosto]

Yeah Del,

He does look a little big for the fishbowl now that you mention it. LOL

Also do you put a G49 in the line after a M37,M38

M27, or M28? Or Esprit posts does.

[edmBosto]

__________________________________

Or Esprit posts does.

__________________________________-

 

 

Was supposed to read Our Esprit post does.

[Guest]

edmbosto,

no i do not use the auto corner rounding feature although i see where it could come in handy.

[edmBosto]

Thank you