monitor & mastercam settings

[Rick Henrickson 65]

ok trying to get the settings

 

in mastercam:

GDI or open GL

disable hardware excel?

disable front buffer?

 

in monitor

 

adapter is a radeon X300 SE 128mb hyper memory

Harware excell full

enable write combing

 

open Gl

Main setting is balanced

custom setting is

anti aliasing application preferance

anisotropic filtering application preferance

 

Direct 3D is same as open Gl

 

what settings should i be using?

[Guest]

My settings are

 

IN MC

 

Open GL

both disabled

 

Adapter settings are the same you have

 

Make sure you have the very latest drivers available for the card as well.

 

I don't have the rest of the settings you mention associated with my card

 

I am running an Ati X800GT

[Rick Henrickson 65]

that got rid of the ghost lines and arcs

when I was creating circles it would leave ghosts at everypoint i moused over

[Guest]

If you're stuck working with an ATi card you are going to have to get used to seeing some artifacts and things that will dissappear in repaints and such.

 

You CAN get your work done but there will always be, at least there is for me, little things like that. Some you can clean up others just happen as you.