Threadmill File Problems

[Randy Morton @ Clem Industrial]

Hey,

 

Been drawing this little threadmill, and when I go to load it as a custom file it tells me there is problems with the file... this is what it looks like;

 

 

Does this look wrong to anybody?

 

Thanks for the insight!

[Guest]

Make sure ALL of the lines are trimmed together or the definition will not work

[David from FN MFG.]

duplicate lines will call this problem also. I normally do a chain to find if there is only 1 chain. this will also check for broken lines. After chaining i blank this entity to make sure there is nothing "behind" it

 

 

jm2c

[Guest CNC Apps Guy 1]

I don;t like the way the tread ends near the top of the shank. If I had to put a bet down on something, that would be where my money went if the things mentioned above were not the cause.

 

HTH

[Randy Morton @ Clem Industrial]

Thanks guys, did turn out to be a trim issue. All fixed and working just swell.

 

James, I don't really like how it looks either, but that is the way that particular cutter is. Kind of crappy, but, what ya gonna do?

 

Thanks again!