goofy line numbers

[specprogrammer]

Running X2 now. Ran update post.dll. Now I have about 3 things wrong with my post. At certain points there are spaces in the code. Just a line number, no G,M,X,Y,Z,F....Sometimes one, sometimes two. Sometimes it puts a line number at the end of the line in addition to the begining. N1430 X5.4 Y6 N1430. Help me post experts.

[Guest]

Check out the update log. It should be in the directory where the post is located.

 

It looks like there was some code in your post that did not get update properly.

 

It may just be an e$ is either missing or is missing its $

 

Also if you open the post and scroll through it, the missing or incorrect sections are generally notated and easily picked out as incorrect.

[specprogrammer]

# --------------------------------------------------------------------------

# Program & Sequence number format

# --------------------------------------------------------------------------

fmt O 7 progno$ # Program number

fmt N 7 seqno$ # Starting Sequence No.

fmt N 7 seqinc$ # Sequence No.Increment

fmt N 7 n$ # Main Program Seq No's

 

This is what my post looks like. I don't see any errors in the update log either.

[Guest]

Mail

[specprogrammer]

would you like the whole zip to go file? or just the post?

[Guest]

Just the post should be fine.

 

 

I hope

[specprogrammer]

I tried. Not sure how to attach a file using the forum. I just cut and pasted to email.

[Guest]

Mail back at you.

 

Can you zip up the .pst file

 

jmparis65@(removethis)gmail.com

[Guest]

Mail,

 

I changed a couple of things, I noted them so you can see what I did.

 

I "think" that'll get it for you.

 

If not, it might really be time to update to a newer post, that is an oldie

[specprogrammer]

thanks John