NetHasp & Hasp -w- locked posts

[kccadcam]

Ok, here's the scenario.......

 

I have 1 NetHasp with 4 seats of Mill L3 and 1 regular Hasp with Mill L3.

 

All Posts, Machine and Control Defs are in a common location on our network.

 

I had Allan Jones at MCam NorthWest build some new

5-axis posts for us. (Great job by the way!!)

 

The problem is that the posts are locked to the NetHasp and Hasp.

In my Machine def I have both posts available. I'm pointing to the NetHasp version of the post as a default.

If my programmmer who has the regular Hasp wants to use that Machine Def, I cannot get the regular Hasp post to work.

If I put that post on the local computer with the regular Hasp, how do I get the Machine Def to be Happy????

 

If I copy that Machine Def to the Local Computer and program a part with it, what happens when someone else opens that file on the NetHasp??

(Local vs. Network)

 

Does this make sense???

[kccadcam]

......Bump.......????????

[Allan Brown]

Because of this precise issue, as of X we started to check against multiple SIMs within the single encrypted post itself. You could certainly request that your post developer do the same.

[Allan Jones]

Thanks for the tip Dave. I think it took me 3 full days just to understand what Kevin meant. I don't bin very many posts and I had never run across this issue before this week. Anyway, problem solved.

 

Best,

Allan

[kccadcam]

Thanks goes out to Dave and Allan!!!

Life is happy on the network now....

 

Glad to see you joined this fine forum Allan.