No Sim Found

[LaszloK]

After updating hasp codes on one machine testerday we now get the "no sim found" error on startup today.. I did a search on this forum to try and find an answer, have updated the hasp drivers (5.20), have shut the system down and rebooted. None of these attempts have fixed the problem. The hasp utility finds the hasp and haspinfo says it is a good hasp. That machine is a windows 2000 machine. Any ideas?

 

Thanks,

Laszlo

[Lee.]

check what version the hasp is licensed for.

 

maybe your trying to boot up something your not licensed for.

 

Just a thought.

[LaszloK]

thanks for the reply Lee, but the version and hasp should match. We did not change MC versions, only needed to update the code prior to it running out. I put the previous code in and still the same result. The programmer just tolde me that he also installed X2 (side by side install) and the net2.0 framwork yesterday also.

[Yogesh K. Raman]

quote:

---

he also installed X2 (side by side install)

---

the hasp/nethasp settings for X2 will over-ride the ohther previous versions of HASP programs installed, I think. Maybe the NetHASP program of X2 set to network instead of HASP?

[LaszloK]

thanks yogesh, I think you sent me in the right direction. I ran the nethasp utility even though we do not have a nethasp. All of the fields were blank except the button was set for a nethasp. I clicked the hasp button (all of the fields remained blank) exited the utility and all seems to be fine.

[Yogesh K. Raman]

Glad I could help,