change job setup and slowing in corners

[DJG]

I'm looking to change the defauts to the job set up file.

Can the job setup file be changed throught the screen, configure file or does it have to be reset up for every job.

 

Also, I need to slow down the feed rates in the corners of pockets to half of the programmed feed. Is going to the "chain manager" and "change at point" the only way to do this?

 

Does X2 offer any options that V9.1 doesn't?

 

We are using V9.1 MR0105 and we have X2 (we haven't made the switch yet).

 

Thanks for your help

[Guest]

Welcome to the forum

 

 

If your settings are going to be different file to file it needs to be changed or restarted with a different config file

 

See if this helps with the config settings

 

Linky

 

There is an option on the job setup page to slow corners, if you need it tool path specific only then yes, you'll have to edit.

 

X2 has offered new functionality, stability and reliability.

 

Check this out for "some" of the new things available in X2

Linky2

[DJG]

John,

 

Perfect! Thanks for your quick response.

 

I haven't seen the old Pats logo in a long. Cool!

 

Darren

[Guest]

GTH

 

Where you from?