Kitimuura Post Help

[Larry Metzler]

I am a first time forum user, and I hope my request is not out of line. We have recently purchased a new Kitimura HX300 iF horizontal machining center. We have never used

either a 4th axis machine, nor a pallet changer. I am attempting to modify a generic post for the same machine and would like to request a favor. I have written a simple program to contour a 2.00in square block 1.00 thick with .125 radii on the corners. using a .250 flat mill I have center drilled, drilled and tapped 4- 8x32 holes thru the corners on 1.25 centers, indexed the “B” axis at 0, 90, 180 and 270 degrees and called for a pallet change. I would ask anyone who may be able to help, if they could write the same program, for the same machine, and let me have a copy of the G Code output “ONLY”,

I could use this as a comparison for my output. Thank you.

 

MCX Mill3

 

 

Larry Metzler

CAD CAM & CNC Programming

Motorola Inc

Plantation Florida

[email protected]

[Post dept]

Larry,

 

Download mpmaster from the posts page, take your programmed file in Mcam, post it with the HMC definition. Bang, you have working code to go against.

 

Brett

[Larry Metzler]

Brett,

 

Many thanks, it worked like a charm, Wife and Kids

are from your neck of the woods,(Toronto).Stay warm.Again thanks