Mpmaster Question

[Guest]

I'm using Mpmaster for V8. How do I get the standard tool table into the header of the nc code see example belowe.

 

This is what I get:

 

%

O1709571 (0170-957-00-A-HORIZONTAL)

(MASTERCAM - V8.)

(MC8 FILE - C:0170-957-00.MC8)

(POST - HITACHI-H)

(MATERIAL - ALUMINUM INCH - 6061)

(PROGRAM - 0170-957-00-A-HORIZONTAL.NC)

(DATE - MAR-08-02)

(TIME - 15:32)

TEST TEST

(T14 | 1/2 3FL HOG EM - 1.25 LC | H0 | D0 | D0.5000" | R0.0250 | CONTOUR....)

(T38 | 1/4 X 90 SPOT - 1.0 EXT | H0 | D0 | D0.2500" | | DRILL/CBORE)

G00 G17 G20 G40 G49 G80 G90

M31

T14 M06 (1/2 3FL HOG EM - 1.25 LC)

 

This is what I want:

 

[

O1709571 (0170-957-00-A-HORIZONTAL)

(MASTERCAM - V8.)

(MC8 FILE - C:0170-957-00.MC8)

(POST - HITACHI-H)

(MATERIAL - ALUMINUM INCH - 6061)

(PROGRAM - 0170-957-00-A-HORIZONTAL.NC)

(DATE - MAR-08-02)

(TIME - 15:32)

TEST TEST

(T14 | 1/2 3FL HOG EM - 1.25 LC | H0 | D0 | D0.5000" | R0.0250 | CONTOUR....)

(T38 | 1/4 X 90 SPOT - 1.0 EXT | H0 | D0 | D0.2500" | | DRILL/CBORE)

]

%

G00 G17 G20 G40 G49 G80 G90

M31

T14 M06 (1/2 3FL HOG EM - 1.25 LC)

[Allan Brown]

Move your "%" from pheader to psof.

 

In pheader add a "["

Add a "]" before your new "%" in psof.

 

[ 03-09-2002, 11:59 AM: Message edited by: Dave Thomson ]

[Guest]

Thanks Dave. I had already figured that out.