Color change in verify.

[TSPLINE]

greetings every one I have another question from a new X user.In 9 when we went to verify a part with mutiple depths & using multiple cutters we could set the paramaters to change the color of the cut and toolpath but when two cutters went to the same Z depth the floor would change to the new cutter. With X2 we are not getting the z depth color to change with the new tool. we rely on this alot to look for any leftover material not cleaned up by the smaller cutter. Can any one help with a sugestion.

[John13]

Try this..settings...configuration...verify interface...verify settings..misc. options