Go to XYZ point / G55

[CamHead]

I'm programming a part where I want to call a drill and go to a point (0,0,2), 2 inches above my part,

picking up my H offset code and approaching to a clearance plane.

Then I want to call a cycle in G98 and have the "I" value at .5 above the part and the R at -.50.

 

However...when I post the job, I get a G55 code in my output program. I want to remain in G54. I've got the same result in 2 different systems.

 

Why is this sequence changing my work coordinate system?

[Guest]

I am going to guess you are using a different T plane

 

On the planes button on the tool parameters page, set the work offset to 0 for both moves and that should take care of the G55 call