machine simulation

[Chris Parish]

Hey guys:

 

 

Wasn't there a 4 axis horizontal (machine simulation) that used to be listed on the "emastercam" web site

 

What happened to it???

 

[Rick Henrickson 65]

I think they were saying if your maintenance is current you can use theis

http://www.camaix.net/maschinensimulation.html

[Randy Morton @ Clem Industrial]

I thought that they had said in the release of MR1 that the machine simulation icons were already integrated into MCX2, but were not currently available (icons on the top in the MD Manager...)?

 

The other thoughts with this are me trying to imagine what kinda a computing HP one would need to drive those graphics in verify. As well, where is one going to go about getting the 'virtual' machine for the 1000's of different types? You can't tell me someone at CNC is going to sit there and draw every machine from the dawn of time just for something to do?

 

I would bet likely the machines will be purchasables, but again, who is going to make them, and on what scale (age) will they be available. If you take a shop like ours, we have about 15 different machines types (brand names, with obvious variations in the machines themselves).....

 

So many questions relating to this...

[Allan Brown]

Link to the download on the FTP here:

 

http://www.emastercam.com/ubb/ultimatebb.p...t=024082#000009