Indexer moves reversed

[DaveR]

Making a prismatic part on a Haas with HRT 160. The post is outputting indexer moves reversed ie: should be 13 degrees but post outputs -13 degrees. The planes are correct in angle, visually and as analyzed.

 

Is there a post setting I need to flip what could be the problem.

 

Did a search but did not find anything about this.

 

Dave

[Guest]

Dave try swapping this switch in your post

 

code:

---

rot_ccw_pos : 0     #Axis signed dir, 0 = CW positive, 1 = CCW positive

---

if it's 1 make it 0, if it's 0 make it 1

[DaveR]

You know I like this forum, but it takes so damn long to get an answer come on... 5 minutes? Who has that kind of time anymore?

 

Thanks John (again)

 

Dave

[Guest]

quote:

---

but it takes so damn long to get an answer come on... 5 minutes?

---

Sorry, I'll endeavor to do better the next time.