haas lathe post question

[Santa Fe]

How can I fix this post to output without the next marked lines and to move G50 right before

G97.

 

Post processor is MPLHAAS-SL.PST

 

O0111

N100 G20

N110 G28 U0. W0. <<<<<<< this

N120 G0 T0100 <<<<<<<<< this

N130 G0 T0101

N140 G97 S657 M03

N150 G0 X2.325 Z0. M8

N160 G50 S1000 <<<<<<<< move this before G97

N170 G96 S400

N180 G99 G1 X-.0625 F.012

 

Thank you

[Colin Gilchrist]

JLeal,

 

This output is coming from the psof$ section of your post. If you can post that section of your post processor, we can tell you what to change.

[chris m]

The first piece is controlled by sg28ref if I remember correctly; find that in psof and ltlchg and place a # in front of it, or delete. Personally I never delete anything in a post, just comment out with the # so I can still see what the post looked like when I started.

 

In a post I tweaked for a machine we run with G50 / G27 I did this mod; you may wish to try this first:

 

psetup #Setup post based on NCI settings

mi1=0 # Default to G50/G27 mode for this machine (cdm)

 

Your best bet for the G50 spindle speed lock is to turn fastmode off and see which postblock generated that particular piece, there are a couple of different areas that output that depening on the post.

 

C

[Santa Fe]

thank you

 

I will try it