set-up sheet question

[cadmonster66]

I know almost every-one here is running vX but is there a regular set-up sheet I can use in V9 . Really don't want to use the HTML 1 . Just 1 that will list tools dia offsets and all that good stuff.

thx

john

[Justin Beebe at Folsom Tool]

Cadmonster66

 

The only ways I know of are NC_utils/setupsheet or to go to the job set up page click on tools then right click and select Doc file then print it. I don't believe the Doc file will give you the diameter offsets. It gives the tool numbers, diameter of the tools, corner radii, and tool names. When asked to append to existing file select "no".

 

Justin

[Guest]

In-House solutions has a nice HTML sheet available as a trial from this forum and for a fee(small) from them.

 

I have used this since V9 to current, convince several bosses to purchase it and will be purchasing it this week for my own use.

[Midwest]

Try X+ you might search the forum for a link for ver 9 X+, or someone still using ver 9 might help you out.

 

It lets you pick and choose what you want on your set-up sheet and put in the order you like.

 

 

HTH

 

 

[Midwest]

There is one on the FTP under setup sheets called setupX+.exe

 

 

I believe this is the right one for ver9

 

 

[cadmonster66]

Mid,

Sorry that 1 is for vX , looks for mcamX or something like that was hopin to find it but so far it's a big no goooooo . thanks for the tip though

John

[Midwest]

 

 

mmouse............try this