Corrupt Toolbars

[Steve Arteman]

Is anybody have problems with corrupt toolbars? I have had this happen in 3 separate computers where all the icons will turn on and it lock the system. I would be in the settings customize area and it seems to happen if I close out with the red X at the bottom of the customize box. I have to restart the computer and delete the toolbar from mastercam x2 mr1 sp1 config folder restart mastercam and save a new mastercam.mtb file to the config directory.This will fix the system, but I loose all settings for really no reason other than closing out with the red X. I can't seem to duplicate it but am running on Windows 2000. Is anybody having this problem?

Thanks

Steve

www.cad2cam.blogspot.com

[Steve Arteman]

No toolbar problems?

[Richard Bechard]

I have had this problem with xp pro running mcx2.I haven't taken time to figure it out.

It does seem like if I drag a toolbar to the screen it is ok,but if I close with red X it will load all toolbars to screen and take forever to start responding again.When it happens to me and I reopen mcam It will load toolbars ok and all seems fine.

Rich

[Steve Arteman]

Thanks Richard, windows 2000 and the red X may be my problem when it locks up I have to shut down the computer. and delete the toolbars to get mastercam back.

steve

www.cad2cam.net