Fanuc post help

[JCLM]

OK, I have finally made the transition from V9 to X2. Everything seems to be going pretty smooth so far. Right now I'm fine tuning my post and I ran into a problem with one of my Fanuc posts. It seems to be working fine except for drilling cycles, keeps putting some lines in the wrong spot.

 

EX.

O0000(NAME - TEST)

G98G81Z-.05R.1F10.

G80

G20

G0G40G80G17G90

T2

M60

M00(#1 CENTER DRILL )

G54X0.Y0.

G43H2Z2.S3000M3

/M8

M5

M9

G91G28Z0.

 

 

As you can see the drill cycle line is above the tool change. FYI, this post has been updated from V9, however, this is the only problem that I am having with this post and I really don't want to start over with a generic post if I don't have to. Any help would be appreciated.

 

Thanks,

[Kannon]

Try and set your rpd_typ_v7$ to 0 in your post for proper output in the drilling cycles:

[Guest]

You might want to check in your post for this line

 

code:

---

rpd_typ_v7$    : 0     #Use Version 7 style contour flags/processing?

---

Set it to 0

[Kannon]

hmmmm..

someones a little slow today...

[John13]

Well Kannon, he did give you almost 25 minutes to answer

[JCLM]

Worked great. Thanks again guys!!!

 

[Kannon]