MR2 Coolant Generic Fanuc 5-axis

[DavidB]

With MR2 I get a M9 for every coolant option turned on.

I have "First coolant comand shuts off ALL coolant options" ticked in the machine def.

 

But I get this posted code

code:

---

 N0401

G21

G0 G17 G40 G80 G90 G94

M741 (CHIP CONVEYOR ON)

G91 G28 Z0.

( 1/4" BALLNOSE ENDMIL TOOL - 4 DIA. OFF. - 24 LEN. - 4 DIA. - 6.35 )

M13

M11

T4 M6

G0 G54 G90 X-7.372 Y-22.01 A0. B0. S8000 M3

M12

M10

G43 H4 Z50.

M8

M7

M25

M26

M7

M77

Z10.

G1 Z0. F700.

X-3.767 Y-16.782 F1500.

G3 X-5.39 Y-7.95 I-5.228 J3.604

G1 X-33.543 Y11.462

G3 X-42.375 Y9.839 I-3.604 J-5.227

G1 X-45.98 Y4.612

Z10. F10000.

G0 Z50.

M9

M9

M9

M9

M9

M9

M5

G91 G28 Z0.

M13

M11

G90 A0 B0

M740 (CHIP CONVEYOR OFF)

G53 G90 X-530. Y-5.(LOAD UNLOAD POSITION)

M30

%%

---

I only got 1 M9 in MR1

I'm NOT using the MPmaster post I'm using the GENERIC FANUC 5X POST.

 

Thanks

[Post dept]

David,

 

Same issue that applies to the mpmaster style of posts applies to the "First coolant command shuts off ALL coolant options". There's been a parameter change resulting in this error.

 

There should be this line in your post:

 

if prmcode$ = 17101, all_cool_off = rpar(sparameter$, 1) #First coolant off command shuts off ALL coolant options

 

Comment this line out (#) and set the all_cool_off variable to 1 where it's defined (all_cool_off : 1 #First coolant off command shuts off ALL coolant options) to make the post work the same in MR2 as in MR1.

 

Chris

[DavidB]

Thanks Chris worked a treat