Mastercam V9 Post Executable Update

[Allan Brown]

Mass email has problems at the moment, so here is a V9 Update notice:

 

The latest Mastercam V9 Post Executable (v9.03) is now available in the Patches area of the eMastercam.com web site:

 

http://www.emastercam.com/patches/

 

A very IMPORTANT fix in the v9.03 DLL files corrects arc outputs in the XZ & YZ planes. When posting toolpaths when arcs in the XZ & YZ planes were created by the filter, some of these arcs in rare cases would output as a straight line move.

 

The main change in the v9.02 post DLLs was the addition of the ERR_FILE variable that allows controlling under which conditions the .ERR file is kept. This is documented in the "Post Processors - What's New in v9.PDF"

--