rotary subs

[DG]

Hello out there. I have been using MCX for a while on Mikron mill but am new to rotary work. Any masters out there that can point me in a direction. I am using a rotary head in a small verticle(Benchman)

I keep getting feeds in degrees per minute. like:

01 G17 G90 G54 G94 A12.675 X.0211 Y0. S6417 M03 F500.

Z.4315

Z.3865

Z.356 F8.

X.0109 A13.294 F46.2

X0. A13.504

X-.0109 A13.294

X-.0211 A12.676

X.0305 A12.839

I am trying to get an out put of code that will read like this:units per min

G0 G17 G40 G49 G80 G90

( TOOL .02 )

T2 M6

G0 G90 X-.0534 Y0. A178.831

M3 S10000

Z.495

G1 Z.41 F10.

X.0534 F30.

A173.795

X-.0534 F30.

A178.831

Z.407 F10.

X.0534 F30.

A173.795

X-.0534 F30.

A178.831

Z.404 F10.

X.0534 F30.

A173.795

X-.0534 F30.

A178.831

Thanks for any help..DG

[DG]

Sorry about the double post, trouble with my browser.

[PeterM]

Do a search on "inverse feed" that should point you in the right direction.

[DG]

Thank you. I have previously set up an inverse feed post that worked, so I will revisit that. Is inverse what I'm looking for ? I thought inverse put a feed on every rotary move..