Predator Simulation

[kwolf]

Hi,

 

Has anybody tried Predator Virtual CNC along with Mastercam V9? It seems it only works with V7 through V8.

 

Thanks

[cadcam]

Yes and it works well at this point.

I need to check to see if I am able give it out yet.

I was testing it for them.

[kwolf]

Hi Jay,

 

Is the C-Hook ready for download?

I try ppcadcam but it's old version.

 

Thanks in advance

[cadcam]

Kwolf, try downloading again form my site it is the new one now.

[kwolf]

Under what folder can I find it?

[cadcam]

Web site under predator VCNC on http://www.ppcadcam.com/html/predator.html

go to the bottom and download.

[kwolf]

It's for V9 of Mastercam?

[cadcam]

Its for V7 thru V9.

Kwolf download that sucker.

[kwolf]

We have some problems with that(in v9). Besides C-Hook has not been updated since last summer.The installer does not install over V9. 3 weeks ago we renamed cfg files from v9 to v8 and installed it (because installer didn't accept v9 folder and still it does not). But when we started verification in V9 it generated error. Obviously because of different styles of handling data in V9.

[cadcam]

you must be doing some thing strange.I know it works I have it on 2 boxs for two months.

 

the new one finds nine you tred cheating with the old one I see.

 

I just sat down to ypdate my VCNC to 4.1.1 and the chook.

 

[ 06-01-2002, 09:27 PM: Message edited by: cadcam ]

[cadcam]

Well installed my new VCNC 4.1 with chook took a file from V9 and ran it thru no trouble.

[kwolf]

Hi again,

 

Our verify ver is 3.41. Is that the problem?

[cadcam]

That may be the trouble.

I would have to look into it.

I take it you don't want to update to the newer version?

If you go to V4 you will find it to be faster along with more support.

[kwolf]

I don't know when the boss wants to upgrade.