WCS Video file

[DTrace]

I seen a file on the FTP site called WCS ?.avi When I downloaded it and try to view all I get is voice.

Has anyone else seen this? If you listen to the file it talks as if you are watching him.

[cadcam]

What FTP is this on?

I do not see this file in any of my folders.

[DTrace]

I found it on MasterCams FTP site. Here is the address. Its called WCS Demo.avi

ftp://ftp.mastercam.com/CustomerExchange/

[cadcam]

Thanks Dtrace ,downloading to take a look.

[cadcam]

Ok I have tried this AVI in win2k an winXP and get know video on either one.

 

PDG do you have any thoughts on this?

[BlueBeard]

Try installing the TSCC video codec from www.techsmith.com

 

Cool video!!!

 

[ 05-15-2002, 12:48 PM: Message edited by: BlueBeard ]

[DTrace]

If you also look in the same directory you will see another file called "work offset and.?" If you change the ext. to .avi it will work also. I hope this helps ya'll as much as it did me. The help files were not much help on the new WCS.

[cadcam]

Ok with every one support I was able to run this.

 

Here is the update file and the AVI on the FTP

WCS Vedio & tcss software update if needed like me.

[Michael Reynolds]

Ok, that was GREAT!!!!

 

Who did this? I'd like

to thank them for thier

time in creating this demo.

 

Mike R.

[DTrace]

I will upload the "work offset and.avi" to your FTP site if you like. This file shows how to create work offsets with the new WCS. I think it shows more then the other.

[cadcam]

Thanks Dtrace please put in the same folder.

 

PDG did you make the AVI is that your voice or may be Gary?

 

[ 05-15-2002, 03:21 PM: Message edited by: cadcam ]

[DTrace]

I posted it to the ftp://mastercam:[email protected]/Ma...cified_uploads/

 

Thanks for your help with the video problems. The guys here thought the files were great. If anyone has anymore of these helpful video files please post them for all to see. A picture is worth a thousand words. It seems like the older you get the smaller the words are in the manuals.

[cadcam]

quote:

---

It seems like the older you get the smaller the words are in the manuals.

---

ROLMAO