Wire EDM

[Michael Reynolds]

Does anyone have a wire EDM program they can share? Some students are doing a report on EDM's & we don't have any of them

 

Thanks All!

 

Mike R.

[Colin Gilchrist]

code:

---

 O0001

N100 G0 G20 G90

N110 G54 X22.49076 Y1.125 I1. J0.

N120 G0 X22.49076 Y1.125

N130 M60

N140 M35

N150 M81

N160 S101 D1

N170 G42 G1 X21.99076

N180 Y19.61488

N190 G3 X21.61576 Y19.98988 I-.375

N200 G1 X-.625

N210 G3 X-1. Y19.61488 J-.375

N220 G1 Y.93541

N230 G3 X-.41667 Y.62361 I.375

N240 G2 X.74536 Y-.08333 I.41667 J-.62361

N250 G3 X1.11803 Y-.5 I.37267 J-.04167

N260 G1 X18.75697

N270 G3 X19.12964 Y-.08333 J.375

N280 G2 X19.875 Y.75 I.74536 J.08333

N290 G1 X21.61576

N300 G3 X21.99076 Y1.125 J.375

N310 G40 G1 X22.49076

N320 M50

N330 M30

%

---

This is a simple wire program that cuts a contour. You'll notice that it just looks like regular G-code. What kind of information are your students looking for?

[Michael Reynolds]

Thanks very much Colin!

 

All they need is an example.

 

Thanks again!

 

Mike R.