Trying to Pick-up Tool Length Offset on B-axis Tilt-Spindle

[Ryan Green MLC CAD Systems Inc.]

Can someone tell me what the G or M codes are that correctly call the tool length offset in the program when working with a B-axis tilt-spindle? My program is posting out fine, but I need to add the G or M codes which will tell the machine to compensate for the tool length in Z and X. I'm running a DMG DMF 360 with the Siemens Sinumerik 840D.

[Ryan Green MLC CAD Systems Inc.]

In reference to above, I'm running a round part in the A-axis of the machine, which gets engraving all around the OD on a 120 degree conical face. I am using the advanced multi-axis add-on, in 4 axis mode with the 5th axis locked at 20 degrees.

 

Thanks,