drill to point depths?

[k turk]

okay, i have about 200 holes to drill into a 3 inch block of material. the depth of each hole is for the most part random. if i have a point at the bottom depth of each hole is there a method out there that allows me to select all the bottom points and simple specify those as the ending points for the drill cycle?

 

please tell me i don't have to create 200 operations . . . . please.

 

thanks

k

[Guest]

select your points at the bottom of the holes and use a depth of incremental 0,

 

that will drive the drill to the point depth in each position

[k turk]

cool.

 

thank you