The application you were running has encountered a problem and needs to close........

[Murray Mold]

Hey all,

I have had this problem before when clicking on toolpath parameters and reloaded the machine def, but this time I can not even get the file to open. I've opened MCAM then go to "File/Open", I have double-clicked the file to open it that way and I done "Right click/open with" but it still throws the dreaded alarm and will not open so I can fix it.

Does anybody know a workaround to get this crazy thing opened?

Thanx

[Guest]

go into your config folder.

 

There is a file named

 

 

MDM1120.prm

 

if it shows it is 0k file size, delete it and try to start MCAM again

[Murray Mold]

Thanks for the reply.

It's showing 45 bytes.

[Guest]

45 bytes,

 

it should only be 1k

 

when Mcam closed properly

 

OK,I see how you check it, that is OK

[Murray Mold]

Well, after the 57th try....it opened. Now should I reload machine def?

[Guest]

YES!!!!!!!!!!

 

[Murray Mold]

Thanks again John,

I thought I would be the only poor soul working on Saturday