Murray Mold
-
Posts
168 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Murray Mold
-
quote: The shirts DID go out - we were waiting to see if we could get a couple new sizes in, but alas if they're not there by the end of this week I'll tan UPS' hideStill no shirt here in Ky..
-
I've used Fraisa .5mm balls in 45-48 Rc with a 40000 spindle .001 ADOC .002 RDOC @ 32 IPM, but 55-60 Rc is a total different ball game, Good Luck
-
If you change from absolute to incremental from one op to the next, all 3 axis will rapid at the same time, possibly causing a crash. I only suggested this because he might not have noticed if his z axis actually did this or not.
-
You might want to look at your operations also and check to see if you change from absolute to incremental.
-
Okay Thanks guys. Jeff, yes I would appreciate it if you send it Monday. Thanks again
-
We have a VF3 with Thru Spindle Coolant and the spindle stops before the coolant comes on and then restarts. Is there a way to make the spindle not stop when the coolant thru comes on?? Thanks
-
Send it to me. khorton(at)murraymold(dot)com
-
Not me
-
Doug, Also try re-starting after changing the parameters. I remember when I was hooking it up to the network I had to re-start numerous times to make changes take effect. HTH
-
#238 Max Spindle Speed = 7500
-
#79 =4000 #131=6000 HTH
-
Doug, The tech acted stupid when I asked, then I told him I had seen one run 6000 rpm's at U of L and he started laughing and then said he would do it. They're not gonna tell you it can be done, but the pic shows it can.
-
quote: What type of application are we talking about? We use ours mainly for prototype plastic parts. Sometimes when a customer wants a plastic mold, they also want a handful of parts before the mold is built to make sure the parts work.
-
We use these from Eagle Rock. It works great http://eaglerockonline.com/index.php?Catal...&ProductLine=84
-
Yes it can be done. We had a Haas tech in here last week to work on our VF-3 and while he was here I asked him to turn the spindle up on our TM-1. It now runs 6000rpm I wasn't out in the shop watching, so I can not tell you how to do it, sorry
-
It selects outside the window no matter if you have In, Out, In+ or Out+ selected.....(on mine anyway)
-
Go here or search the forum. http://www.eng-tips.com/viewthread.cfm?qid=200454&page=4
-
I was changing the sort options when it happened. I hit escape several times and it cleared everything out, but when I tried to do another op is when it showed the error. I saved and closed out and everything is fine now. Thanks
-
This is a new error to me. Just when you think you've seen em all...lol It happened after a spotdrill op and I tried to start another drill op and keep getting this error and it won't let me do anything else. I've hit escape several times to exit whatever function it thinks its in, but that does not work.
-
Still waiting also....
-
quote: I just received the hard copies of my X3 discs today from me reseller. Sure am glad X3 was available for download.I still have not recieved mine. (or a t-shirt either, Tyler)
-
quote: ---------------------------------------------- (if my math is correct). RS-232 cabling from PC to machine should not exceed 300 ft. ---------------------------------------------- Actually the length of cable changes with baud rate. It should be no more than 100 ft @ 9600 baud rate decreasing in length as baud rate increases. Anyway, the gubment should have the coin to go wireless....if not, do ethernet.
-
It has to be a machine thing because I use it alot on a different type machine with no gouges.
-
Look and read here.... http://www.emastercam.com/ubb/ultimatebb.p...ic;f=1;t=031482
-
Does your machine have a graphics screen? If so, I would plot it out at the machine and it will show any weird moves. I had a similar problem. It put a G18 in the middle of the program (verify didn't show it) and ruined a tool, toolholder and a $8,000 insert. I contacted my reseller about it and he could'nt figure it out. I reposted it and everything was okay. It's impossible to look over 16Mb of text, but the machine backplot showed it, I just didn't look closely enough before I ran it. I shoulda zoomed out a little...