Posting Breaks

[Sunder]

Dear All,

I did some modifications to a 2X lathe Fanuc post and got hold of this problem.

 

MC splits my NC output in to two files. when I click G1 for posting mcam gives one nc program and when i come back to mastercam screen I can see one more file save dialog box.

 

Now I am getting two programs as the splitting happens as below picture.

 

 

how can i stop this splitting?

 

thanks n advance

 

regards

 

Sunder

[Goldorak]

you got the same problem , change nc file mane to get all the same

 

http://www.emastercam.com/ubb/ultimatebb.p...ic;f=1;t=030628

 

[mcpgmr]

Right click in the operations manager with all operations selected and change the nc file name to match your model name and that should do it.

[Sunder]

yes..thank you axela 06 & mcpgmr...

 

got fixed that one...