V9 POST

[SBA]

Not a big deal but I was wondering. A lathe file from V8 to V9 same post converted to v9 same paramters etc. The NC file has some very minor differences on start of radius. Only .0001 but is

there a parameter or are the calculations different in the two versions?

v9

N130 X1.6428

N140 G3 X1.766 Z4.4885 K-.0619

N150 G1 X1.806 Z4.2599

N160 G3 X1.8065 Z4.2545 I-.0616 K-.0054

 

v8

N130 X1.6427

N140 G3 X1.766 Z4.4885 K-.0619

N150 G1 X1.806 Z4.2599

N160 G3 X1.8065 Z4.2545 I-.0616 K-.0054

[SBA]

Also I found that the actual value is 1.64275 so it appears to be a rounding difference between v8 and v9?

[Ed Lustic]

I have noticed the rounding differences using the same file and MC version, just posting it from a different computer. Like you said, not a big deal, but I have been wondering about that for quite a while.