Okuma LIB files

[Mick]

Ok, after spending some time with someone very conversant with LIB files, and assigning them to G/M codes, it has driven me to learn how to use them, and apply them to my work here.

 

However, I can't find anywhere in the Okuma manual about the use of these files, and how to assign them to G/M codes. Is this information in the Okuma manuals?

 

We have a Multus B400W with an P200L control. Can someone point me in the right direction?

[Mugsy DeDawg]

register at theinvetionzone.com, it is the old Multuszone.com sites re-emergence. there is a lot of Okuma Multus related info on there. As for .LIB files, they are registered in the parameters page, and you will have to set the amount of memory to be used. When you first fire up the machine, and go to automatic, the files will register when you push any button and clear the blue pop up screen. We use them for the a lot of things like an enhanced tool change function and clearing/resetting things when the machine is restarted after the auaxilary axes have been actuated.

[okuma man]

Hi Mick,

 

Have a look at your manuals all the info is there. Please see the Special Functions Manual -LE32-110-R04 pages 127-131 everything you need is there. Either that or you could talk to your local agent as they should have all the info.

 

Cheers