Transform - Rotate - offsets

[Kannon]

I am having trouble with transform rotate...

I am using X3 and I am basically cutting a groove in a dial, then transform rotating it a number of times for the correct spacing. Problem I am having is I want to use the same offset.. no matter what I choose in the "work offset numbering" it increments the offsets in the code. ANY of the selections does this. I just want the offset in the beginning and then from there on... just A rotations...

The paths look good, A commands are there.. but now I get G54, G55, G56.

any help would be appreciated.

I using the GENERIC HAAS 4AXIS VMC post.

[Guest]

Brian,

 

Go into the operation >> planes and hard set eh work offset to zero

[Kannon]

Thanks JP...

 

That did the trick.