Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Post

jameszhawks

By jameszhawks,
in Industrial Forum

 Share

Recommended Posts

Colin Gilchrist Proficient

Colin Gilchrist

Posted
Posted

James,

 

The standard Fanuc 3X mill should get you pretty close. So will the MPMaster post.

 

If I remember correctly, there should be a generic "X" style Mazak post available, I can't rememeber if this was available on the X2 install disk or not. It might be one of the 'extra' downloads on the CD, or you might have to request it from your reseller, but it is available...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...