Modify Post To Unload Part

[Gecko]

Newbie to post editing here. I am currently using mpmaster and X3 to control 2 HAAS mills. I would like to add a g55 G00 X0, Y0 to the final few lines of my posted code. The g55 X0, Y0 position could be set to wherever my machinist wants the mill table to be so he can unload the part. No really sure where to start modifying the post to do this. Any help would be appreciated!

thanks

[chris m]

peof #End of file for non-zero tool

pretract

pbld, n, "M33 ( CHIP AUGER STOP )", e #Added (cdm)

comment

#Remove pound character to output first tool with staged tools

#if stagetool = one, pbld, n, *first_tool, e

n, "G00 G55 X0. Y0.", e <== this should work

n, "M30", e

mergesub

clearsub

mergeaux

clearaux

"%", e

[Gecko]

Awesome thank you