Changing tool library default path for machine

[Dustin S.]

Had a brain fart I know Ive done this before. When you select which machine you want to use in Mastercam you know how you now have machine group properties and it shows default paths for tool library, operation library and operation defaults.

 

I changed the paths for the operation library and operation defaults in the machine definition but can't seem to find how to change the tool library path to get it to stick to that machine. How do I do this?

 

Thanks in advance

 

X3 trying to change on a milling machine if it matters

[Tony35]

in machine def >general machine parameters > tool/material libraries

near the bottom you will see a file tree button to change the location

 

HTH

[Dustin S.]

Thanks alot!

[Tony35]

no problem