WARNING! - No Lower Turret

[Randy Morton @ Clem Industrial]

I programmed something up with my Integrex post. Seems when I was going thru the Properties - Tool Settings tab in the TP Manager and inadvertantly click the 'Assign Tool Numbers Sequentially' checkbox.

 

So, to fix said stupidity after going thru 85 operations and changing the tool numbers back to what they are suppose to be (I used the Tool Manager to change the numbers) I go to repost.

 

I now get numerous errors. Similar tools that arent similar sharing a different number? I get the warning that is the subject of this thread. And as such it will now no longer post out anything beyond the tooltable..and not even the entire tooltable.

 

What gives?!?! I really dont want to start this one over again. So any help would be great.

 

Tks!

[Randy Morton @ Clem Industrial]

NM, I figured it out. Had to track down which tools were giving me the Lower Turret error and replace those tools with 'new' (the same) tool from the library and it solved the issue.

 

Very strange! Hope you enjoyed the read tho.

[Guest]

Glad we could help Randy