surfaces help(file is on ftp site)

[cherokeechief79]

ive cut the file of the human head that is on the ftp site under ver 9 files.its pretty impressive and comes out great except where the lips meet the face surface.in the corners there are 2 deep undercuts and when u get down to the final cut with the smallest ballmill it gouges tring to get into this area.is someone who is good at surfaces please take a look at this and let me know if it can be fixed easily?ive tried everything even converting all of the surfaces to one solid but just cant seem to fix this area.

its under ver 9 files and its human head zip.

 

thanks

mark

[BernieT]

Mark, zip and email me your file and I will look at it.

 

I looked at the human head.zip on the FTP and see nothing wrong that would gouge the part.

 

.

[Kannon]

Mark..

there is a file on the ftp in the mc9 folder that is not a .zip file called human head.. (next to the one you put up) have you looked at that one?

 

otherwise can you select it as a check surface so it dont gouge?

[cherokeechief79]

ill look at it again tonite but i think thats the one im trying to use(the unzipped one)if you turn the model over and look at the corner of the lips you can see where they dont extend all the way out to the head surface.although it does not "gouge" it does try to get into this area.

you can only see it if you flip it over and look at this area.

thanks

mark