Eroda wirecutter

[bb]

Hi

I'm about to try and get our Eroda dcnc 500 to run from wire9. It currently uses peps camtek software to produce a .tap file. this file is incremental and only linear moves.Can anyone help with a post for this machine or simular machine.I have already aproched my dealer.

[Lucky]

I am not familiar with Eroda. Where is it manufactured? Is the control proprietary or a standard such as Fanuc, Mits, Heidenhain, Siemens, etc.?

[bb]

Lucky

Eroda are english made its controled by a 486 pc and eroda software it has intergrated cam (peps camtek ) to create cutterpaths . we import dxf files from mastercam then use the toolpath creation on the machine to create the .tap file .I wouldnt recomend anyone by one of these machines we made a mistake

[Lucky]

Thanks for the info BB

 

Best bet is to stick with the big three: Agie, Charmilles, Mitsubishi. Fanuc and Sodick also produce nice machines. We use all Agie here.

 

Good Luck