Multiple Work Offsets

[RobertELee]

Did a quick search and couldn't seem to find what I'm looking for. I'm setting up a machine for multiple work offsets and have run into a problem. When I post toolpaths with multiple work offsets all my work offset lines come out as "G54.1" even though I have some G55 and G56's. If I go in and hand edit the program it runs just fine. What setting am I missing to get it to post out the correct offset?

 

Thanks in advance!!!

 

X2MR2SP1

 

MPMAZAK post processor

[Jack Neelands™]

You have mail

[RobertELee]

Email recieved Jack. Thank You!! I will get try it in a bit.

[Jack Neelands™]

Make a back up copy of your pst file before you go and edit it.

[RobertELee]

That worked great Jack!! Thanks again!!

[PeterM]

Another hint, in the view manager is an editable field work offset, this is by default -1 (which just increments the workshift #) you can set it to whatever work shift # that you want, I.E. 0 = g54, 1 = g55 etc.