HTML setup sheet is not creating tool images.

[Daniel M]

I'm looking at the html.set and I cant see why my tool graphic images aren't getting output.

 

Any ideas??

[Guest]

DO you have a setup folder in your MCAM directory and does your HTML set sheet point to it?

[Daniel M]

John,

 

Nope. No setup directory.

 

This is from the html.set file:

 

#Mill tool image directory

sdirpath_force "" #optional force of mill tool image directory

 

I do get a IMAGES directory and my screen shot image is there.

[Guest]

You likely need to download the HTML Support file from here.

 

http://www.emastercam.com/tools/html/

[Daniel M]

John -

 

Is there a way to make change the font size?

[Daniel M]

John, I did download and install from that link.

[Guest]

Inside the .set file there are some settings for different font preferences

 

code:

---

#Font preference

sfont "verdana, arial, helvetica"

#sfont "arial, sans serif, helvetica"

#sfont "times new roman, courier new, arial"

#sfont "ms sans serif, sans serif, arial, helvetica"

---

By default it is going to look in the root directory of your mastercam installation, if the setup folder is located in a different location there is a switch for mapping that

 

code:

---

#Root Mastercam location

sroot_force "" #optional force of root installation directory

#sroot_force "C:mcamx2" #optional force of root installation directory

---