Post Output Result

[spade117]

Using the generic haas 4x mill post. I can't remember where/what the setting is to change the output from just linear moves.

 

It is outputting this:

 

code:

---

N130 G0 G90 G54 X-239.811 Y67.61 S8000 M3

N140 G43 H8 Z20.

N150 M8

N160 Z8.

N170 G1 Z7.612 F1000.

N180 G41 D58 X-241.811 F666.7

N190 X-241.809 Y67.533 Z7.601

N200 X-241.804 Y67.456 Z7.589

N210 X-241.795 Y67.38 Z7.578

N220 X-241.782 Y67.304 Z7.567

N230 X-241.765 Y67.228 Z7.555

N240 X-241.745 Y67.154 Z7.544

N250 X-241.722 Y67.08 Z7.532

N260 X-241.695 Y67.008 Z7.521

N270 X-241.665 Y66.937 Z7.51

---

When I want it to do this:

 

code:

---

N110 G0 G90 G54 X-239.811 Y67.61 S8000 M3

N120 G43 H8 Z20. M8 T8

N130 Z8.

N140 G1 Z7.612 F1000.

N150 G41 D58 X-241.811 F666.7

N160 G3 Z6.112 I1.619 J0.

N170 Z4.612 I1.619 J0.

N180 Z3.112 I1.619 J0.

N190 Z1.612 I1.619 J0.

N200 X-241.548 Y68.494 Z.25 I1.619 J0.

N210 X-241.811 Y67.61 I1.356 J-.884

---

Any help?

[Guest]

What kind of operation Spade?

 

There is a Use 3D arcs in several but knowing what you're using will help.

 

It may or may not be a control def setting

[spade117]

It's a contour ramp.

[Tony35]

turn off linearize output in the ramp options box

[spade117]

It is off.

 

This only happens with the haas post...all my other posts output it the way I want it.

[André Lapointe@In-House Soluti]

Look in the control def file in the arc section and make sure you have the check marks in the boxes relative to the arc on another plane than XY, something like allows arc on XY planes, on XZ plane or on YZ plane.

 

HTH

[spade117]

That worked. Thanks Andre'