Post help

[alanu23]

I see that we have some post gods on here. The language doesn't make much sense to me. wondered if anyone could help me get onto the right track.

I have been using 4 ax generic HMC post and machine def. Been using it for Mori seiki nh4000 and nh5000. here is a practice program and what I edit it to look like. Notice the M11 and M10 before and after EVERY B ax movement. is there a way to put that in the post. but only put a M11 on simultanious 4ax movement.

 

any help would be appreciated.

 

From this:

 

%

O0000(POST PRACTICE)

(DATE=DD-MM-YY - 20-05-09 TIME=HH:MM - 14:17)

(MCX FILE - C:DOCUMENTS AND SETTINGS**TECHDESKTOP****2343-17 OP20.MCX)

(NC FILE - C:DOCUMENTS AND SETTINGSAUTECHDESKTOPPOST PRACTICE.NC)

(MATERIAL - ALUMINUM INCH - 2024)

( T5 | NO. 2 CENTER DRILL | H5 )

( T14 | .348" DRILL | H14 )

N100 G20

N102 G0 G17 G40 G49 G80 G90

N104 T5 M6

N106 G0 G90 G54 X-7.3159 Y-7.358 B90. S4500 M3

N108 G43 H5 Z14.

N110 G98 G81 Z.045 R1.6 F30.

N112 G80

N114 G55 X.075 Y-7.358 Z14. B0.

N116 G98 G81 Z7.2859 R1.6 F30.

N118 G80

N120 M5

N122 G91 G28 Z0.

N124 B0.

N126 M01

N128 T14 M6

N130 G0 G90 G55 X.075 Y-7.358 B0. S2800 M3

N132 G43 H14 Z14.

N134 G98 G83 Z6.8659 R1.6 Q.1 F20.

N136 G80

N138 G54 X-7.3159 Y-7.358 Z14. B90.

N140 G98 G83 Z-.375 R1.6 Q.1 F20.

N142 G80

N144 M5

N146 G91 G28 Z0.

N148 G28 X0. Y0. B0.

N150 M30

%

_________________________________________________

 

To this:

 

%

O0000(POST PRACTICE)

(REV - 20-05-09 - 14:17)

G91 G28 Z0.

G28 X0. Y0.

G90

G20 G0 G17 G40 G49 G80

M01

T5 M6(NO. 2 CENTER DRILL)

S4500 M3

G0

G90

G54

M11

B90.

M10

X-7.3159 Y-7.358

G43 H5 Z14.

M08

G98 G81 Z.045 R1.6 F30.

G80

G54

M11

B0.

M10

X.075 Y-7.358

Z14.

G98 G81 Z7.2859 R1.6 F30.

G80

M09

M5

G91 G28 Z0.

M01

T14 M6(.348" DRILL)

S2800 M3

G0

G90

G54

M11

B0.

M10

X.075 Y-7.358

G43 H14 Z14.

M08

G98 G83 Z6.8659 R1.6 Q.1 F20.

G80

G54

M11

B90.

M10

X-7.3159 Y-7.358

Z14.

G98 G83 Z-.375 R1.6 Q.1 F20.

G80

M09

M5

G91 G30 Z0.

M11

G28 X0. Y0. B0.

M10

M30

%

[Mike S @ S4A]

so that looks like rot lock/unlock, yes?

a setting in machine def can pick that up...

that post has the logic in it; look at rot_type, force_index, and rot_lock blocks....and look in the machine def..click the edit button to get the mach def mgr then click on the b axis component....

[alanu23]

Yes that is it. Mori's have to have it or it alarms out. I looked in machine def manager and I do not see anything of that nature.

[Mike S @ S4A]

I tried to put the file up on the ftp but no luck....check your inbox for a message from [email protected] attached zip2go has sample ops using the generic 4x hmc....

[alanu23]

I'll check it out.

Thankyou.

[alanu23]

Well that took a little doing but, it gets me started! it'll be awesome not having to put those rot locks in all the time!

Thanks again