LOL john, what's that cliche about history?

100% to Scott's Solution - The 5 axis engine solves the waterfall problem. If you're a relatively new Mastercam user you wouldn't recall a similar problem with the old verify engine doing the same thing. I think CNC is working on a user setting interface for MU1 so we'll have something like the access to verify options we had in config up thru X6

assuming you're running mastercam from a network hasp, run nhasp.exe and click "read"....

The "extra Z move is most likely from the feed plane - .1 incremental

response time is all about having the right reseller..............

gird baby gird

Kevin has the correct answer. These data paths are determined in the Machine definition (.Tool & .Material Libraries). These are in the control definition (.defaults libraries inch & mm and .operations libraries inch & mm). Section 7 of the S4A basic training curriculum(s) covers all this stuff

"property analysis" will mean something different depending on the type of entity analyzed. "analyze entity properties" (F4) works on your wireframe (lines, arcs, splines created in mcam, or re-propogated as edge curves). "analyze distance" can lock to their endpoints or the virtual snap points on a solid. "analyze dynamic" wants you to click on a solid's face or on a surface. it shows things like curvature, extents in XYZ, or current position.

didja check "use island depths" in the depth cut params?

boss vs. body - creating two bodies is creating two bodies (check the solids tree in the op mgr) adding a boss to a body adds a feature on an existing body; thus one entity in the tree. think about it

It's really not a good idea to run to sessions

The issue is related to tool profile and how it is compensated differently (Z only for drilling, D or ID and Z for profiling/facing). If Mastercam is sharing one common geometry file for the tool you have to be careful. Better to have separate profiles saved for the insert drill as a drill and as a boring bar, Then reference those in the Mastercam ops/tool manager. Its also helpful to lock the drilling op that's calling, say, T0202 for drilling before creating a boring op with T0220 (same tool in the actual turret calling both D and Z compensation. Only serves to emphasize the value of good training and tech support.

Better in general, not in topic specific terms... I'll play both sides here- The electric arming switches on the SBD Dauntless didn't work right either; make the pickel hot and it drops in the ocean . But that didn't stop Max Leslie and the other aviators launched from Hornet, Yorktown, and Enterprise from succeeding at Midway. The larger problem is most likely Mastercam's total integration: Main Interface GUI to Ops Mgr to Verify and back. I am not a software engineer so I can only imagine the difficulty of the task; multiple hardware & operating system variables plus multiple native format support. That said, you as end users have an expectation; The product you purchase will work (in legalese terms I think its referred to as " the implied warrant of merchantability". Talk to your reseller, voice your concerns. Have them advocate for you to corporate. Or seek out corporate reps in appropriate forums (like the exhibit floor at IMTS) but keep it civil. We do this and more for our maintenance and TSA customers at S4A, its even paraphrased in our website/mission statement

You may have to resort to supressing all helical output - i.e. - linearize it part and parcel to using the Fadal control

Not a good idea to run multiple mastercam instances....ever.

If the issue is a mill level 2 seat (so only one drive surface allowed) consider making edge and slice curves through all and building a new single surface with them. We cover this in our 3 day Advanced Mill class for two reasons: 1 - getting the job done in mill level 2 2 - modifying flow

someone should start a whole new thread on these new c*ntry of origin names let's include opec too!! hmmm, lesse, qua-daffy is in labi, i mean libya....chavez in pen*suela....

Just be careful with a tool literally defined in mastercam as a facemill; stepovers are based on effective cut diameter, not outside body diameter...forgive the redundancy if you already knew that.

Here's a snippet from our advanced mill training manual (which paraphrases what you'll find in the Mastercam help file: Essential Concepts - Depth Limits & Cut Depths Depth limits and Cut depths specify the range of Z elevations to execute cuts within for surface toolpaths. Depth Limits are literal. Cuts occur only between the minimum and maximum specified. Cut Depths settings are a bit more involved. Absolute cut depths are just like depth limits. All cuts in the toolpath are equally spaced between the minimum and maximum limits. Incremental cut depths* are measured between the top and bottom of the part. You can enter an adjustment amount to the top and bottom cuts. Mastercam automatically calculates the Stock to leave on drive surfaces parameter into the cut depths, and spaces cut depths equally. * Used for most rough surface toolpaths and for finish contour toolpaths If the depth limits remove sections of the toolpath gap settings will determine the tool motion between the remaining sections. Gap settings might require movements that conflict with the depth limits. In such cases, the gap settings take precedence.

surface rough parallel employs "cut depths" on tab three; if they'e expressed as absolute they're true absolute elevations in the current toolplane. If they're expressed as incremental then they're incremental from the drive geometry's range of elevations

have you checked/cleared your temp data lately?

Thanks Tyler...I've got four guys in for foundation training right now that do plasma spray (but you already know that....)

A little more information please. where and at what level are you teaching - Jr high, high school, under grad, graduate, or industrial?

Anytime

that is EXACTLY what depth expression as incremental gives you. Create a drilling op on your projected points. Then when you get to the linking parameters tab click the question mark at bottom left. This brings you to help specific to linking parameters (Clearance, Retract, Feed Plane, Top of stock, Depth). follow the links trail out to the extended explanation of absolute versus incremental in these settings.... To put it in brief; Absolute is absolute elevation in the current toolplane (over-riding geometry's ture elevation). Incremental is a relative relationship: Incremental Depth is a positive or negativve shift from geometry true elevation Incremental Top of stock is the same Incremental Feed plane, Retract, and Clearance are relative to top of stock. IMO this is a powerful but somewhat underutilized feature - one we cover (or review) at all levels of training ...