feed output problem

[mike_f]

Hi everyone,

I hope someone can help me with this, I'm trying to program a horizontal and I've got something strange happening. if I program on the front side all is o.k., any other side introduced into the program changes my feedrates to F999999. including the work on the front. I'm using an mpmaster_horizontal.pst that was converted from mcX.mr2, any help would be greatly appreciated, I'm confused.

thanks in advance

 

regards

mike

[iowajim62]

Try reading this thread.

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=031184

[Dan@home]

It is as Iowa says or just us the newer Mpmaster X3 post.

[mike_f]

thank you for the link Iowa. much obliged.

thanks for the response Dan, I've downloaded the X3 post but I have so many mods. in the X2 one I was using I don't have time to mess with it right now. We have (1) Mazak horizontal that I program about once a year so next time I program it I will probably be running X4.

thanks guys. I really appreciate the help.

 

regards

mike.