Error message from post with no error????

[Ron Branch @ Verisurf]

So I post using the post and get error even though my control def is set to only on fatal errors.

 

Here is me error report every time I post:

code:

---

30 Oct 2009 08:06:00 AM - <0> - Report created.

30 Oct 2009 08:06:00 AM - <2> - Initialize posting log file

30 Oct 2009 08:06:00 AM - <2> - Using MP run version 13.00 and post components version 10.00

30 Oct 2009 08:06:00 AM - <2> - Initiate opening the post processor file(s).

30 Oct 2009 08:06:00 AM - <2> - Post processor file name: C:MCAMX4LATHEPOSTSINTEGREX E SERIES.PST

30 Oct 2009 08:06:00 AM - <2> - The post processor file has been successfully opened.

30 Oct 2009 08:06:00 AM - <2> - Post version information (input):

30 Oct 2009 08:06:00 AM - <2> - UPDATEPOST Version 13. was used to modify this file.

30 Oct 2009 08:06:00 AM - <2> - The file was modified by this product on 23 Oct 09 13:08:19

30 Oct 2009 08:06:00 AM - <2> - The post was written to run with Mastercam Version 13.

30 Oct 2009 08:06:00 AM - <2> - The post product type is Mill/Turn.

30 Oct 2009 08:06:00 AM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful.

30 Oct 2009 08:06:00 AM - <2> - Search for defined post variables, strings, postblocks was successful.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'met_mtol$' was re-initialized from 0.000001 to 0.001

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'met_ltol$' was re-initialized from 0.002 to 0.01

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'helix_tol$' was re-initialized from 0.0005 to 0.0001

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'met_helix_tol$' was re-initialized from 0.005 to 0.001

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'dec_seq_right$' was re-initialized from 3. to 0.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'dec_seq_left$' was re-initialized from 3. to 0.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutput$' was re-initialized from 1. to 0.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutputxz$' was re-initialized from 1. to 0.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutputyz$' was re-initialized from 1. to 0.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'larctype$' was re-initialized from 2. to 5.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'larctypexz$' was re-initialized from 1. to 0.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'larctypeyz$' was re-initialized from 2. to 5.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcs$' was re-initialized from 1. to 2.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsxz$' was re-initialized from 1. to 2.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsyz$' was re-initialized from 1. to 2.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcsxz$' was re-initialized from 1. to 2.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed4$' was re-initialized from 2. to 1.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed5$' was re-initialized from 3. to 1.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed4$' was re-initialized from 2. to 1.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed5$' was re-initialized from 0. to 1.

30 Oct 2009 08:06:00 AM - <2> - CONTROL DEFINITION - - Post variable 'peckacel$' was re-initialized from 0. to 1.

30 Oct 2009 08:06:00 AM - <2> - PARAMETER DATA - - Possibly incorrect parameter number detected: 0.00

30 Oct 2009 08:06:00 AM - <2> - Successful completion of posting process!

---

Would anyone care to explain to me what I keep getting this even though this error report shows no errors???

[Tony35]

ron

im no post guru but this could be the problem

 

quote:

---

30 Oct 2009 08:06:00 AM - <2> - PARAMETER DATA - - Possibly incorrect parameter number detected: 0.00

---

HTH

[Ron Branch @ Verisurf]

Ok I will bite so why would it say the value is Zero for the possible problem? Why will it not list that problem it if is a problem?

[Paul Decelles]

If I had to guess I would say that the problem is most likely a rd_params$ command without setting rd_param_op_no$. Do a search in the post and comment out the command if it exists, that should fix the problem. As to why the error says zero, it is because the default value for rd_param_op_no$ is zero and it is an error because there is no such thing as operation zero.

[Tony35]

your guess is as good as mine thats the only thing i saw that would be "out of place"

 

the post isnt even sure what it is

 

were you playing around in the post at all since this has come up?

 

nevermind paul chimmed in

[Ron Branch @ Verisurf]

Paul thanks for the response I will take a look and let you know.

[Ron Branch @ Verisurf]

Thank you Paul that was the problem.