Warning that is Dead Wrong

[Ron Branch @ Verisurf]

Rick I have reported this they have the file and still no answer. I can not Verify my Lathe/Mill operations with X4 MU1 on what good times we are having with a $750,000 machine having to be proved out tool by tool since I do not trust Mastercam. Yes we should have Vericut, but after a 1000 dead horses do not think will happen.

 

HTH

[The_Evil_Machinist]

quote:

---

Mine just crashed by rotating part with space pilot [band Head Against Wall]

---

.

Hmmm where did I trace the crash to earlier?

.

Linky to where I traced it

.

.

Hey why did ja edit my post? At least put a funny pic in there.

 

:EDIT:

 

just cuz...i edited in mine what you refered to.

and I didn't like that part of my reply.

 

:EDIT:

 

Oi stop messing with my posts lol

 

:EDIT:

 

It'll neva happen again.

 

:EDIT:

 

OH NOZ IT'S A THREAD IN A POST OF A THREAD!!!

 

 

[ 11-04-2009, 12:14 PM: Message edited by: The_Evil_Machinist ]

[Steve Hattori]

Rick, I have had this problem appear in X3- I could never get it to consistently repeat, and often it was with a Cimco path, so I never reported it...I see that it has maybe gotten worse with X4. I will try and get it to happen and send in a new bug report. This sort of problem is ridiculous.

[[email protected]]

quote:

---

Hmmm where did I trace the crash to earlier?

---

Don't throw yer shoulder outa socket pattin yerself on da back

 

http://www.emastercam.com/cgi-bin/ultimate...t=035634#000008